Compared with woven fabric, warp knitted fabric has looser weaving and better permeability. Therefore, there is a slight difference between the processing of the artwork and the woven fabric print. In the direct dye printing of knitted fabrics, the permeability of the printing paste is relatively good. Generally, 8 to 16 filaments are re-colored. When the mechanical accuracy of the printing equipment allows, the 8 filaments are good to ensure the printing accuracy. When color printing, try to reduce the full cover of three complex colors to prevent the printing from sticking; anti-print printing has paint anti-reactivity and active anti-reactivity. In the art of anti-reactivity, because the edge of the pigment printing is not easy to open, the printing paint The color separation draft, the size is drawn in accordance with the requirements of the color draft, and when the active pattern is covered with active anti-reactive printing, the printed color should not be covered with each other as much as possible, but the white part can be covered with it. The color of the connected printing can increase the color brightness of the colored part without producing white edges caused by drawing. In the processing of color separation drawing, in addition to the above requirements related to the printing effect, the general processing principle is to conform to the original spirit, and to repeat the style of the manuscript on the cloth.