1. Plain cloth Plain cloth refers to plain cloth. Generally, the warp and weft yarns used are the same or have little difference, the warp and weft density is also very close, and there is no obvious difference between the front and back. Therefore, ...
Cotton-type fabrics are cheap and widely applicable. They are better underwear, baby wear and summer fabrics, and are also popular spring and autumn outerwear fabrics. The main characteristics of cotton fabrics are mainly as follows: (1) Good hygrosc...
Printing fabric, also known as printing fabric, is a process of printing and dyeing dyes on fabrics. It is a textile with printing patterns, including cotton, polyester, etc. A simple understanding of printed fabric is that the fabric is a kind of f...
Recycled fabric is a new type of environmentally friendly fabric. The raw material of recycled non-woven fabric is extracted from discarded mineral water bottles and cola bottles, also known as RPET fabric (non-woven fabric). Because this non-woven f...
Washing: Clothing is woven from protein-based delicate health care fibers. It is not advisable to rub on rough items and wash with a washing machine. The clothing should be immersed in cold water for 5-10 minutes, and use special silk detergent to sy...
First of all, please understand these three concepts: plain weave, twill weave, and satin. Plain weave: A fabric woven with a plain weave is called a plain weave. That is, the warp and weft yarns are interlaced every other yarn (that is, the yarns ar...
When the fabric is weaved, the warp and weft weave changes are used to form a pattern, the yarn count is fine, and the requirements for raw cotton are extremely high. It can be divided into woven, warp knitted and weft knitted jacquard. Weft knitted ...
There are also different brightness forms in the production of spandex, usually: Transparent, CLEAR- LUSTER: The surface fibers are relatively smooth, so the reflection becomes transparent, the friction rate is low, the evenness is poor, and the col...
wet spinning WET-SPINNING, a method in which the original solution is solidified into silk by double diffusion in a coagulation bath. Production process: stock solution----spinning pump----enter warm water from spinneret, below 90℃----regeneration ta...
Spandex fiber overcomes quality defects such as stress, strain properties, count range and flexibility of rubber yarns. It was first produced by dry spinning. Today, there are roughly four production methods: dry spinning DRY SPINNING, a method in wh...
Spandex is generally not used alone, but is incorporated into fabrics in small amounts. This kind of fiber has both rubber properties and fiber properties. Most of them are used for core-spun yarn with spandex as the core yarn, which is called elasti...
Spandex is generally not used alone, but is incorporated into fabrics in small amounts. This kind of fiber has both rubber properties and fiber properties. Most of them are used for core-spun yarn with spandex as the core yarn, which is called elasti...
English 
Español 
عربى 